|Condition:||New||Name:||Conveyor Belt Repairing Machine|
|Working Pressure:||0~2MPa||Belt Vulcanizing Temperature:||145ºC|
|Heating Time:||Less Than 25 Minutes||Curing Time Set Adjustable Range:||0-99 Minutes|
|Power:||1.1 Kw||Warranty:||24 Months|
Water Cooling Conveyor Belt Repairing Machine,
Hot Vulcanizing Conveyor Belt Repairing Machine,
Water Cooling Hot Vulcanizing machine
Water Cooling Conveyor Belt Repairing Machine Hot Vulcanizing Joint
Conveyor Belt Repairing Machine are used to hot splicing two pieces same type coveyor belt together.No matter fabrics conveyor belt steel-cord convyor belt or other heavy duty conveyor are suitable. The conveyor belt can be 650-3500mm in width, and the curing lenth is according to the conveyor belt and customer request.
Technical Parameters (Reference)
Special requirements: Voltage, Pressure, Temperature, Heating platen dimension etc. we can make special for you, if you have any requirements.
The machine consists of frame, two heating plates, an integrated hydraulic lifter and an electric control box.The frame is made of high-strength aluminum alloy, it's small size, portable,safe and reliable.
1. spot repair vulcanizer ready for use for the repair of conveyor belts
2. particularly easy-to-transport due to the low weight of the single parts
3. transportation by only one person is possible, as there are only two components
1. Transfer machine to the repair site.
2. Fill glue in the damaged areas that need to be repaired (see the adhesive part in the vulcanization process of the belt joints, or the demonstration by our staff when the equipment is being tested).
3. Place the frame under the belt and align it with the damaged area.
4. Place the down heating plate just below the damaged area of the belt and then place the upper frame.
5. Press the hydraulic lever until it reaches enough pressure level.
6. Get the first power wire well connected to the electrical control box. Connect the second wire with the electric control box and the upper and down plates.
Note that it corresponds to the sign on the electric control box.
7. Turn on the electric control box and start the vulcanizing repair process.
The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tiger,we will use pe film for packing or pack it according to customers special request.
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
1. Q: Are you a manufacturer or trading company?
A: We are the manufacturer. We have our own plant, workers and technology research development department.
2 .Q: Where is your factory located? How can I visit there?
A: Our factory address is located in beautiful Qingdao, West Coast Economic Zone. The nearest airport is Qingdao Liuting International Airport. Kindly send flight information in advance, so that we can pick you up at the airport, and book hotels as you require.
3. Q: What are your hot sale machines?
A: The main products are conveyor belt vulcanizing joint machine, mine explosion-proof conveyor belt vulcanizing machine, conveyor belt repair machine, conveyor belt peeling machine and other relevant equipment.
4. Q: How does your factory do regarding quality control?
A: Quality is priority No. 1 and we have our own quality control department. We will make a strict inspectin before the machines leave our factory.
5 .Q: Are the technical parameter is fixed?
A: Basically, each model corresponding to the related machine. But we can design different type machines according to the client's requirement.
Technical Parameters (Reference)
Contact Person: Lily Fu
Tel: +86 130 6133 2206