|Material:||Aluminum||Usage:||Conveyor Belt Repairing|
|Heating Plate Size:||350*350mm||Pressurizing Method:||Manual Hydraulic Pump|
|Beam Span:||1100mm||Warranty:||2 Years|
Aluminum Conveyor Belt Repairing Machine,
Hydraulic Conveyor Belt Repairing Machine,
Hydraulic conveyor belt press machine
Hydraulic Type Spot Repair Splicing Press Machine for Rubber Belt
YXL hydraulic spot vulcanizing repair machine, also known as C-clamp spot repair vulcanizer ,is an electric heating repair equipment for conveyor belt .During transportation, the surface of the belt may be damaged or pierced by the conveying material.Then the spot vulcanizing repair machine can be used to fix it .The machine consists of frame, two heating plates, an integrated hydraulic lifter and an electric control box.The frame is made of high-strength aluminum alloy, it's small size, portable,safe and reliable.This machine is mainly applied to repair less than 350 * 350 dot damage.
Machine specification of Spot Repair Splicing Press Machine
|YXL-250x250||1.4 kw||1300*250*780 mm||149 kg|
|YXL-300x300||1.6 kw||1300*300*780 mm||152 kg|
|YXL-350x350||1.9 kw||1300*350*780 mm||163 kg|
1. Transfer machine to the repair site.
2. Fill glue in the damaged areas that need to be repaired (see the adhesive part in the vulcanization process of the belt joints, or the demonstration by our staff when the equipment is being tested).
3. Place the frame under the belt and align it with the damaged area.
4. Place the down heating plate just below the damaged area of the belt and then place the upper frame.
5. Press the hydraulic lever until it reaches enough pressure level.
6. Get the first power wire well connected to the electrical control box. Connect the second wire with the electric control box and the upper and down plates.
Note that it corresponds to the sign on the electric control box.
7. Turn on the electric control box and start the vulcanizing repair process.
The conveyor belt repairing machine is made of high-strength aluminum alloy, at the same time it's lightweight, very easy for moving.
Shipping package of Spot Repair Splicing Press Machine
The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tiger,we will use pe film for packing or pack it according to customers special request.
There are lots of machines for your choice, please feel free to contact us for more machine details.
Contact Person: Miss. Lily Fu
Tel: +86 130 6133 2206