Flameproof Conveyor Belt Hot Vulcanizing Machine

Mining Flameproof Conveyor Belt splocer for High strength heavy duty conveyor belts

Easy to set-up and operate.

Conveyor belt splicing is the process of joining two pieces of a conveyor belt. Usually, this is done to either elongate the original conveyor belt or to repair a torn or damaged one. Conveyor systems are employed in various industries, meaning that there are many types of conveyor belts and components. To properly splice a belt, we ensure that the type of belt, speed of conveyor belt system, materials traveling on the belt and conveyor belt environment are considered.

Mining Flameproof Conveyor Belt splocer for High strength heavy duty conveyor belts is for conveyor belt hot vulcanizing joint, widely used in the field of jointing of canvas, nylon, steel cord conveyor belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry, etc.. 

• Vulcanization pressure: 1.5Mpa; (217Psi; 15kg/cm2)
• Vulcanization temperature: 145 Celsius degree; (293 Fahrenheit equals)
• Difference in surface temperature of vulcanized plate: ± 5 Celsius degree; (41 Fahrenheit equals)
• Calefactive time (at normal temperature to 145 Celsius degree): ≤30 mins;
• Power supply voltage: 220V to660 v; 50/60 Hz; 3Phase;
• Output power of Electronic Control Box: 36 KW;
• Temperature adjustment range: 0 to 200 Celsius degree; (0 to 392 Fahrenheit equals)
• Timing adjustment range: 0 to 99 min;
• After the pressurization of 0.8MPa (=116Psi =8kg/cm2),
• The gap between upper and lower heating plate is not more than 0.4 mm.
• Applicable belt width: From 650-2600mm (26" to 102")
•