Portable Hot Conveyor Belt Vulcanizing Machine Made Of Aluminum Alloy

• Water pressure bag (also can use air pressure) Press for 100PSI, 200PSI surface pressure for textile and steel cord belts, Up to 1.8Mpa/2.0Mpa.
• 100 p.s.i.(7 kg/cm sq.) units mostly suitable for splicing fabric ply belting
• 200 p.s.i.(14 kg/cm sq.) units usually used to do steel cord conveyor belting
• Max Belt width: from 650mm to3000mm
• Different heating platen size and combination.
• Degree of the heating platen: 22 degree bias angle or 16 degree, 20 degree, rectangle and other degree is optional.
• Power Voltage: 380V. 660V. 525V480V. 440V. 415V. 400V or 220V
• Vulcanizing temperature:145℃ (adjustable 0~200℃)
• Temperature-rising time (from normal temperature to vulcanizing temperature): no more than 25 min, accords to different conditions, actually, normal conditions, is around 20 mins.
• Improved cooling system, when use pressure pump for cooling, cooling time only 5mins (cooling from 145 to 75 degrees)

Note:

1. Specifications are subject to change without notice;
2. Build-in cooling standard on all units;
3. Total weights include electrical control panel, cable set and set up templates for all models;
4. 200 PSI models include fluid pressure pump and reservoir unit Model HPP20-4(mandatory for operating pressure above 100PSI/7 kg/cm sq);
5. Temperature adjustable between 0-199deg.C;
6. Sectional vulcanizers are built on a 22 degree bias, 16/20 or other degree are optional;
7. Custom sizes, rectangular configurations and multiple platen arrangements available on request.

Main Componets:
Aluminum Frame (Spanner Bars), made of high quality aluminum are engineered for any belt width or operating pressure. From EA up to E380.