|Name:||Rubber Conveyor Belt Joint Vulcanizing Press||Material:||Aluminum Alloy|
|Cooling System:||Water Cooling System||Heating:||Electric|
|Heating-up Time:||30 Mins||Pressure:||1.5MPa|
|Vulcanizing Temperature:||145ºC||Specification:||As Equipment Size|
Industrial Conveyor Belt Vulcanising Machine,
Water cooling Conveyor Belt Vulcanising Machine,
Heavyweight conveyor belt vulcaniser
Water cooling Heavy Industrial Rubber Conveyor Belt Vulcanising Machine
Application of rubber belt vulcanizer :
1. Steel Cord Belt Intermediate Rubber is an uncured rubber for hot vulcanized belt splicing.
2. It is designed to use as an inter-core cord rubber replacement material in splicing steel cord conveyor belts or a tie gum in fabric belts.
3. The material is designed to bond to cured intercore rubber and wire cords in all standard grade steel cord conveyor belts, as well as fabric belt cured skim rubber and general bond improvement material for general grade fabric conveyor belts.
Preparation before vulcanization
1. Check the site and choose a place that is convenient for transportation as the work place
2. Vulcanization site requirements: flat, wide, clean, dust-free, dry air, water source, adequate lighting
3. Remove more than 2 sets of upper roller brackets at the vulcanization operation site (subject to sufficient space to place the vulcanizer)
4. Both ends of the belt are tightened with an electric hoist and fixed with a splint.
5. Place the base (beam), pressure plate, and lower heating plate of the vulcanizer on the conveyor frame in order, and straighten it according to the angle of the heating plate
6. Put both ends of the fixed belt on the lower heating plate, and then start the operation
|1||Applied Conveyor Belts Width||≤1000mm||≤2000mm|
|2||Belt Jointing width||≤830mm||≤830mm|
|3||Number Of Pressurized Beams||10Pieces||10Pieces|
|4||Max. Capacity Pressure||2.0Mpa||2.0Mpa|
|5||Heating Time||≤40 minutes||≤40 minutes|
|6||Heating Temperature Range||Up to 199℃||Up to 199℃|
|7||Height Of The Pressurized Beam||200mm||320mm|
|8||Machine Total Power||15kw||25.6KW|
|9||Heating Plate Size||1230*830mm||2220x830mm|
|11||Gross Weight||About 800kg||About 1300kg|
|12||Cooling Time By Cooling Device||15~20mins||15~20mins|
When vulcanizing joint length: calculate according to formula
In the formula: A-------------length of joint
Z--------------Conveyor belt canvas layer number
b-------------Ladder length of vulcanized joint (m), generally b=0.15m
B--------------Conveyor belt width (m)
Portable Water-Cooled Rubber Belt Vulcanizing Machine and heating plates with silicone heating mats have newly been developed and distributed by RUNNING AMCHINE CO., Characterized by highest quality features and application-oriented design, they are suitable for splicing of fabric- and steel cord conveyer belts.
Contact Person: Jamie