Payment & Shipping Terms:
|After-sales Service Provided:||Free Spare Parts||Keyword:||Platen Vulcanizing Press|
|Heating Material:||Water||Machine:||Conveyor Belt Hot Vulcanizing Press|
|Advantage:||High Efficiency||Control System:||Computer Control|
rubber splicing machine,
tire vulcanizing machine
PVC 600MM AIR COOLED SPICE HOT VULCANIZING PRESSES MACHINE WITH CE
Introduction to the Splice Press
The splice press is an all-in-one solution for splicing thermoplastic conveyor belts (e.g. PVC polyurethane).
No external control box, air pump, or water cooling tank are required.
The presses are provided with electric heating and built in air cooling. The splice process runs fully automated.
• Splice pressure is applied by an internal compressor, max. 2 bar (28 psi)
• Heats up to a splice temperature of max. 200°C (392°F)
• Keeps it at the splice temperature (adjustable dwell time)
• Cools down to the cooling temperature (safe temperature to take the belt out)
• For thicker belts a preheat temperature and preheat dwell time can be applied
• The bottom heating can be set lower or higher than the top heating
• The splice surface is 130 mm ; the heated zone is 110 mm.
If the belt is relatively thick a problem might occur where the outside of the belt is at the splicing temperature too long, waiting for the inside to reach the required temperature. Molten material might flow away or discolor and fabrics might shrink. To avoid this problem from happening, the preheat option can be used. This option heats the belt up (outside and inside) to a temperature just below the melting temperature. After the preheat stage, the inside splice temperature can be reached much quicker, minimizing the risk for unwanted flow of material, discoloring or fabric shrinkage.
The reading of the display relates to the top temperature of the press. If more or less heat is required at the bottom of the belt, the “bottom heat factor” can be used. Please note that this factor relates to a plus or minus amount of heat (%), not to a specific temperature.
presses are available in 5 different sizes:
• 300 mm effective (12")
• 600 mm effective (24")
• 900 mm effective (36")
• 1200 mm effective (48")
• 1500 mm effective (60")
presses function on different voltages
|Effective length||305mm / 12″||610mm / 24″||914mm / 36″||1219 mm / 48″||1524 mm / 60″|
|Effective width||120mm / 4.7″||120mm / 4.7″||120mm / 4.7″||120 mm / 4.7″||120 mm / 4.7″|
|Weight lower part||11.5 kg||18kg||23kg||28.5 kg||32 kg|
|Weight upper part||12kg||13kg||18kg||25.5 kg||30 kg|
|Total weight||21kg||30kg||38kg||54 kg||62 kg|
|Max. pressure||2 Bar / 28 PSI||2 Bar / 28 PSI||2 Bar / 28 PSI||2 Bar / 28 PSI||2 Bar / 28 PSI|
|Max. temperature||200 ℃/390 ℉||200 ℃/ 390 ℉||200 ℃/ 390 ℉||200 ℃/ 390 ℉||200 ℃/ 390 ℉|
|Packaging list(L x W x H)||790x430x420mm||1090x430x420mm||1390x430x420mm||1720*450*430mm||2030*470*410mm|
|Gross weight||50 kg||72 kg||85kg||104 kg||127 kg|
ANTAI is the leading manufacturer of conveyor belt vulcanizing equipment. ANTAI has been offering unique Sectional Vulcanizing Systems that provide strong, long-lasting splices, for over 27 years in china.
The Unique and Innovative belt splicing system designed to be portable and offer maximum versatility in splicing all types and sizes of conveyor belting. It’s intelligent, modular design and vast array of unique operating features, can handle all types of belt designs in every conveyor application.
The ZLJ series belt vulcanizing machine (hereinafter referred to as vulcanizer) is an electrothermal type vulcanizing device used for on-site splicing of conveyor belts. With the advantages of advanced technology, compact structure and convenient usage, it's used for the vulcanized jointing of the belts mixed with canvas, nylon, steel cord, etc., and it's also suitable for the flame retarded, corrosion proof and other special belts. The application area of this kind of vulcanizer is very wide, it can be used in metallurgy, mining, power plant, port and wharf, building material factory, chemical factory and so on.
The Sectional vulcanizer offers equipment, which is portable and easy to set-up and remove from the site. It has accurate control and indication uniform temperature due to the unique element design and uniform pressure over the entire splice area. Components in this model are lightweight and easy to assemble.
Contact Person: sales