Pressure Vulcanizing Bag Conveyor Belt Vulcanizing Machine ISO Certification
Detailed Product Description
||After-sales Service Provided:
||Free Spare Parts, Engineers Available To Service Machinery Overseas
||Oil Or Water
||Cross Beam Profiles:
||Electric And Hand
rubber tile vulcanizing press,
rubber hydraulic press
Pressure Vulcanizing Bag For Conveyor Belt Splicing
Use Installation instructions:
Fill glue inthe damaged areas that need to be repaired (see the adhesive part in the vulcanization process of the belt joints, or the demonstration by our staff when the equipment is being teste
- Put the bottom plate, water pressure plate and lower heating plate under the damaged areas of the belt according to the structural diagram.
- Put the upper heating plate,Insulation board on the damaged areas of the belt.Align the top and bottom plates.
- Locked equidistantlythen tighten the bolts.
- Get the first power wire well connected to electric control box. Connect the second wire with electric control box and the upper and down plates.Note that it corresponds to the sign on the electric control box.
- Connect the end of the high pressure pipe with inlet opening of water pressure plate. And connect another end of the high-pressure pipe with water output hole of water pump.Switch on, add pressure upon vulcanizing machine.
(See the operation method of ATX electric control box).
- the entire rubber pressure water bag with a rubber vulcanization molding
- Under pressure, can be fully inflated, without secondary pressure, to ensure that the conveyor belt curing machine in the belt joint and repair process evenly under pressure, the test safety pressure range of 3Mpa or less, fully meet the requirements of curing machine joints
- the rubber pressure produced by our company is only a quarter of the weight of the old water pressure plate, and because of the expansion of the increase in the installation of equipment on both sides of the fixed bolt only gently wrench with a wrench
- Rubber pressure water bag around only 2 cm border, relative to the old water pressure plate more than 5 cm border, limited to increase the pressure area, thereby improving the quality of curing
- If the vulcanizer pressure beam is separated, it is necessary to put a piece of wood on both sides of the pressure water bag, play the role of protecting the pressure water bag