Payment & Shipping Terms:
|After-sales Service Provided:||Online Support||Voltage:||220V/380V|
conveyor belt cutter,
conveyor belt cutting tool
1200mm pvc/pu conveyor belt cutting machine for vulcanizer presses
Mechanical wire rope conveyor cutting machine (manual type) is our company's structural characteristics based on steel wire rope conveyor belt, combined with a large number of foreign advanced technology, after repeated trials, design and production of SCBC series steel wire core special manual cutting machine. The use of this SCBC series steel cord conveyor belt special manual cutting machine can greatly reduce the workload of maintenance and cutting conveyor belt, and the cutting is smooth and smooth, without grinding, can directly carry out hot vulcanization bonding work, the entire seam looks neat Qi, beautiful and beautiful. This SCBC series steel cord conveyor belt special manual cutting machine does not contain motor, light weight, can realize fast cutting of conveyor belt without power supply, and it is smokeless, odorless and non-sparking, and is fully suitable for cutting of ground and coal mine underground conveyor belt.
SCBC-3K/6K portable steel cord conveyor belt cutting machine
The 3K model can cut the belt below ST2500 strength, the steel wire has a large diameter of 7.5mm or less, and the tape thickness is less than 22mm.
The 6K model can cut steel wire z large diameter 7.5mm or more and 12.3mm or less, and the tape thickness is 35mm or less. When cutting, it is cut vertically along one side of the belt, and the oblique opening cannot be cut.
The SCBC-3K/6K steel cord belt cutter is a manual type and can be used in various working conditions. The belt can be cut safely and quickly without the need for power and other equipment.
The mechanical wire rope belt cutter is manual and can be used in various working conditions.
1. The belt can be cut off safely and quickly without the need of power supply and other equipment.
2. The cutting work is quick and efficient, greatly reducing the labor intensity and shortening the repair time. The 1800mm wide wire rope conveyor belt can be separated in a few minutes. It is not necessary to peel off the rubber on the working surface of the conveyor belt and the cuts are neat and the belt is not wasted. The traditional method of breaking the belt is to peel off the rubber on the upper and lower belts. The wire was then burned with oxygen acetylene. It takes a long time and the rubber is flammable by high temperature burning, and the rubber is denatured and the belt is wasted.
3, small size, light weight, easy to carry and on-site cutting. The wire rope conveyor can be safely cut and separated.
4. The correction of the cutting direction when the machine is working can be completed by walking control, and there is no need to guide the track.
5, cutting tools can be replaced, eliminating the customer's problems.
6, easy and fast to use, easy to operate and maintain.
Contact Person: sales